Last customers

  •  
    Dominik, Jestetten , Germany
  •  
    Håkan, Mölndal, Sweden
  •  
    Carsten, Melle, Germany
  •  
    Karol, Leszno, Poland
  •  
    Diego, san Pietro in casale, Italy
  •  
    Pierre, Montreuil, France
  •  
    Sophie, Hainsfarth , Germany
  •  
    Dragan, Bela Crkva, Serbia
  •  
    Δημήτριος , Κορυδαλλος, Greece
  •  
    Natalia, Athens, Greece
  •  
    Sahir, Muscat, Oman
  •  
    Ignacio José, Las Palmas de Gran Canaria, Spain
  •  
    Margareta, UPPSALA, Sweden
  •  
    Sally, Dixon, United States
  •  
    Daniel, Solterre, France
  •  
    Michael, Kolding, Denmark
  •  
    Gordon, Addison, United States
  •  
    Miljen, Bonn, Germany
  •  
    Ursula , München , Germany
  •  
    Κυριακή, Άγιος Ιωάννης Ρέντη, Greece
  •  
    Antoine, Bassevelde, Belgium
  •  
    maurizio, spinea, Italy
  •  
    Vincent, Venlo, Netherlands
  •  
    Dirk, Halle , Germany
  •  
    Wilhelm , Hohenlochau , Germany
  •  
    davide, peveragno, Italy
  •  
    Linda, Lokeren , Belgium
  •  
    Manuel, Madrid, Spain
  •  
    Luca, Trento, Italy
  •  
    Martin , Krayenberggemeinde , Germany

Gyümölcs- és zöldségformák

Fruit and Vegetable Mould, Star Shape, Change Fruits Shape

Fruit and Vegetable Mould,...

Ár 15,00 € SKU: M Star
,
5/ 5
<h2><span style="text-decoration:underline;"><em><strong>Fruit and Vegetable Mould, Star Shape, Change Fruits Shape</strong></em></span></h2> <h3><span style="color:#ff0000;"><strong>Price is for 1 Mold.</strong></span></h3> <div>The star shape mold is made of PC plastic material, it is a safe, fully transparent and non-toxin material, are completely friendly to the nature and human health, it is very tough and strong, many years' use is guaranteed, and it has been tested well works the past few years.</div> <div> </div> <h2><strong>How to shape the cucumber, tomato or any other vegetable into star shape :</strong></h2> <div><strong>1.</strong> Get the molds ,and choose a proper cucumber for the mold , it can be used on shorter cucumber or just about the size of the mold. it is important.</div> <div> </div> <div><strong>2.</strong> Put the molds on the cucumber while it is maller than the molds , you shall connect 2 part of the molds tightly with screws .</div> <div> </div> <div><strong>3.</strong> After the above things done , what you need to do is await, and take the mold off when u think it is the right time of ripen, it is kind if easy to get the shape . </div> <div> </div> <div>you will be amazed by what you have done, and have fun with it .</div>
M Star
Fruit and Vegetable Mould, Star Shape, Change Fruits Shape
Fruit and Vegetable Mould, Heart Shape, Change Fruits Shape

Fruit and Vegetable Mould,...

Ár 15,00 € SKU: M Heart
,
5/ 5
<h2><span style="text-decoration:underline;"><em><strong>Fruit and Vegetable Mould, Heart Shape, Change Fruits Shape</strong></em></span></h2> <h3><span style="color:#ff0000;"><strong>Price is for 1 Mold.</strong></span></h3> <div>The Heart Shape mold is made of PC plastic material, it is a safe, fully transparent and non-toxin material, are completely friendly to the nature and human health, it is very tough and strong, many years' use is guaranteed, and it has been tested well works the past few years.</div> <div> </div> <h2><strong>How to shape the cucumber, tomato or any other vegetable into Heart Shape :</strong></h2> <div><strong>1.</strong> Get the molds ,and choose a proper cucumber for the mold , it can be used on shorter cucumber or just about the size of the mold. it is important.</div> <div> </div> <div><strong>2.</strong> Put the molds on the cucumber while it is maller than the molds , you shall connect 2 part of the molds tightly with screws .</div> <div> </div> <div><strong>3.</strong> After the above things done , what you need to do is await, and take the mold off when u think it is the right time of ripen, it is kind if easy to get the shape . </div> <div> </div> <div>you will be amazed by what you have done, and have fun with it .</div>
M Heart
Fruit and Vegetable Mould, Heart Shape, Change Fruits Shape

Fruit Mold in the form of Buddha, pear, Muskmelon…

Fruit Mold in the form of...

Ár 15,00 € SKU: M 2 B
,
5/ 5
<h2><strong><em><span style="text-decoration:underline;">Fruit Mold in the form of Buddha, pear, Muskmelon…</span></em></strong></h2> <h3><span style="color:#ff0000;"><strong>Price is for 1 Mold.</strong></span></h3> <p>Fruit mold is used for shaping a buddha-shaped fruit that you can plant in your garden. (No special seeds required).</p> <p>Just place the fruits into mold during mature period, and remove the mold when the fruits reach full maturity.</p> <p> </p> <p><strong>Specification:</strong></p> <p><strong>Material: </strong>polycarbonate<strong></strong></p> <p><strong>Middle size: </strong>10.5x7x6cm<strong></strong></p> <p><strong>Color: </strong>transparent color<strong></strong></p> <p><strong>Application: </strong>Pear, Muskmelon, Ginseng Fruit,or etc.<strong></strong></p> <p><strong> </strong></p> <p><strong>Feature:</strong></p> <p><strong>High strength, good pressure resistance, not easy to deform</strong></p> <p><strong>Can be used repeatedly for 8 to 15 years</strong></p> <p><strong>Non-toxic to humans or to fruits.</strong></p> <p> </p> <p><strong>FAQ - Frequently Asked Questions</strong></p> <p>1. Can this mold make the fruit into a Buddha-shaped?</p> <p>- There are too many fruit types, so we can not make sure the success rate of fruit shaping. We suggest you can test two or three fruits to check whether the fruit can be shaped, and then using on a larger scale.</p> <p> </p> <p> 2. How to fix the mold? Does the package come with nut and bolt?</p> <p>- The mold can be fixed by nuts and bolts as the below picture shown.</p> <p>- All the molds we sell don't come with the nuts and bolts, but you can find them in local hardware store. We hope this will not inconvenienced you. :)</p> <p> </p> <p>3. What is the best time to place the fruit into mold? Is there anything else I should do?</p> <p>- In order to make the fruit into a heart-shaped, you must first start growing the fruit in the same way you would normally. Once the fruit start to show on the vine allow the fruit to grow to about the size of your closed fist. Once the fruit is the correct size you can place the fruit into the mold and use the nuts and bolts to secure the mold. You will allow the fruit to mature inside the mold. Once the fruit has taken the full shape of the mold, usually 60-80 days after planting, it will be ready to remove and eat.</p> <p>- Try not to open the mold until it is fully grown. You may not be able to get the mold back on if it is taken out early. Make sure the fruit is exposed to the sun and you should rotated it every week or so. This will keep the melon from getting a brown side.</p> <p> </p> <p> 4. There are some water vapor contained in the mold. Will the fruits go bad easily?</p> <p>- This is a normal situation. The fruit also need to breath. After placing the fruit into mould, there will be a difference in temperature between inside and outside producing water vapor. All the molds are studded with air holes, there is no need to worry that the fruit will decayed in the damp environment.</p> <p> </p> <p> </p>
M 2 B
Fruit Mold in the form of Buddha, pear, Muskmelon…
Fruit Mold in the form of Heart, pear, Muskmelon 15 - 3

Fruit Mold in the form of...

Ár 15,00 € SKU: M 2 B
,
5/ 5
<h2><strong>Fruit Mold in the form of Heart, pear, Muskmelon…</strong></h2> <h2><span style="color:#ff0000;"><strong>Price is for 1 Mold.</strong></span></h2> <p>Fruit mold is used for shaping a Heart-shaped fruit that you can plant in your garden. (No special seeds required).</p> <p>Just place the fruits into mold during mature period, and remove the mold when the fruits reach full maturity.</p> <p> </p> <p><strong>Specification:</strong></p> <p><strong>Material: </strong>polycarbonate<strong></strong></p> <p><strong>Middle size: </strong>10.5x7x6cm<strong></strong></p> <p><strong>Color: </strong>transparent color<strong></strong></p> <p><strong>Application: </strong>Pear, Muskmelon, Ginseng Fruit,or etc.<strong></strong></p> <p><strong> </strong></p> <p><strong>Feature:</strong></p> <p><strong>High strength, good pressure resistance, not easy to deform</strong></p> <p><strong>Can be used repeatedly for 8 to 15 years</strong></p> <p><strong>Non-toxic to humans or to fruits.</strong></p> <p> </p> <p><strong>FAQ - Frequently Asked Questions</strong></p> <p>1. Can this mold make the fruit into a Buddha-shaped?</p> <p>- There are too many fruit types, so we can not make sure the success rate of fruit shaping. We suggest you can test two or three fruits to check whether the fruit can be shaped, and then using on a larger scale.</p> <p> </p> <p> 2. How to fix the mold? Does the package come with nut and bolt?</p> <p>- The mold can be fixed by nuts and bolts as the below picture shown.</p> <p>- All the molds we sell don't come with the nuts and bolts, but you can find them in local hardware store. We hope this will not inconvenienced you. :)</p> <p> </p> <p>3. What is the best time to place the fruit into mold? Is there anything else I should do?</p> <p>- In order to make the fruit into a heart-shaped, you must first start growing the fruit in the same way you would normally. Once the fruit start to show on the vine allow the fruit to grow to about the size of your closed fist. Once the fruit is the correct size you can place the fruit into the mold and use the nuts and bolts to secure the mold. You will allow the fruit to mature inside the mold. Once the fruit has taken the full shape of the mold, usually 60-80 days after planting, it will be ready to remove and eat.</p> <p>- Try not to open the mold until it is fully grown. You may not be able to get the mold back on if it is taken out early. Make sure the fruit is exposed to the sun and you should rotated it every week or so. This will keep the melon from getting a brown side.</p> <p> </p> <p> 4. There are some water vapor contained in the mold. Will the fruits go bad easily?</p> <p>- This is a normal situation. The fruit also need to breath. After placing the fruit into mould, there will be a difference in temperature between inside and outside producing water vapor. All the molds are studded with air holes, there is no need to worry that the fruit will decayed in the damp environment.</p> <p> </p> <p> </p>
M 2 B
Fruit Mold in the form of Heart, pear, Muskmelon 15 - 3

Become our seed supplier Seeds Gallery - 1

Become our seed supplier

Ár 0,00 € SKU:
,
5/ 5
<!DOCTYPE html> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /> </head> <body> <h2><strong>Become our seed supplier</strong></h2> <h2><strong>What does it take to become our seed supplier?</strong></h2> <p>In order to become our supplier, you need to have a video and pictures of the fruits of the plants you offer us, with your personal details and a date on paper that will be clearly visible (with your name and email address you use for PayPal).</p> <p>If it is a vegetable (tomato, pepper, cucumber ...) you need to know the exact name of the variety, because if you use any other name and we cannot find the information on the internet, then we are not interested in those seeds.</p> <p>You will need to send us a smaller amount of seed (20) so that we can perform seed germination testing. After that, we can arrange a further purchase of the seed from you.</p> <p>We make payments exclusively through PayPal (there is no other payment option).</p> </body> </html>
Become our seed supplier Seeds Gallery - 1